19108A5
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 19108A5 is a surface-mounted timer with a dial knob and a 9-point terminal block. Manufactured by Danaher, this device is part of the Timers and Controllers series and operates on 120 VAC, 50/60 Hz input voltage. It features a NEMA 1 enclosure, Lexan high-impact case material, and a time range of 60 seconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 19108A5 timer from Danaher joins their Timers and Controllers series, made for setups needing time-based control with fast and simple installation. Standing out with a surface-mounted design, this model brings a dial knob for quick changes and a 9-point terminal block, all built into a Lexan high-impact case. The enclosure measures out at 3.75 in (95.3 mm) wide, 3.28 in (84.1 mm) high, and 4.25 in (108 mm) deep including terminals, so it doesn’t eat much space in a control panel. The overall body depth is 2.625 in (66.7 mm), making room tight around the enclosure a bit less of an issue.
Timing uses a 60-second range — handy for short processes or repeat cycles on busy lines. Plenty of quick projects or regular check routines in factories use setups like this, where the dial lets any operator swing right to the needed time. Voltage runs at 120 VAC, 50/60 Hz input, a common standard, so it lands in North America or international projects easy enough. For protection, the NEMA 1 enclosure rating keeps dust at bay for most indoor situations. Mounting isn’t complicated either; there’s two slots set at 1.77 in (44.8 mm) apart, plus a mounting flange that’s 0.19 in (4.8 mm) thick, ready to bolt into fixed rails or panels.
Operator safety and durability get help from the Lexan case that shrugs off knocks and bumps. This holds weight in older plants where maintenance crews might squeeze in new gear without careful handling or where big carts roll by. The mounting slots have a 0.25 in (6.4 mm) length for easier aiming during fit, while the terminal block sticks up 0.61 in (15.8 mm) for fuss-free wire runs.
Frequently Asked Questions about 19108A5:
Q: What is the time range for the 19108A5 timer?
A: The time range for the 19108A5 timer is 60 seconds.
Q: What is the input voltage required for the 19108A5 timer?
A: The 19108A5 timer operates on an input voltage of 120 VAC, 50/60 Hz.
Q: What type of enclosure does the 19108A5 timer have?
A: The 19108A5 timer features a NEMA 1 enclosure, which is suitable for general purpose use.
Q: What is the case material of the 19108A5 timer?
A: The case of the 19108A5 timer is made of Lexan, a high-impact material.
Q: What is the mounting type of the 19108A5 timer?
A: The 19108A5 timer is designed for surface mounting and features a dial knob and a 9-point terminal block.
