Product Description:

The Danaher 0743415-003 is a highly reliable electromechanical timer/counter that is compact and simple to incorporate into a manufacturing environment.

Its maximum count speed is 1000 counts per minute and, as such, can support moderately high cycle operating rates. It also has a minimum on/off time of 30 milliseconds, which makes this application more helpful with repetitive applications, i.e., automated equipment, process monitoring, or assembly line monitoring. The power supply has a nominal input of 115 or 230 VAC with a recommended voltage range of +/-10 volts to give versatility in applying the power supply in different power systems. It has a small power consumption of only 6 watts, so that it can be operated continuously and still be energy efficient, providing no excessive heat or complicated power control is needed. With a figure size of 0.188 inches high by 0.156 inches wide, the module's six digits are still readable in low light or at a moderate distance.

The reset alternatives fall under the manual rotary and lock-and-key categories, and we may choose between limited access and rapid access to offer more security if necessary. When the #22 AWG leads are plugged into the device, it may be readily placed into the control panels. The leads are 7.5 inches (190 mm) long. While the frame and cover are composed of Zamak, which is robust and resistant to corrosion and other material wear and tear, the inside is equipped with plastic wheels and pinions for smooth operation. The unit's mechanical support and electrical insulation are enhanced by the nylon bobbin. It weighs 1 pound 4 ounces (567 grams) when placed on a panel. This is a compromise in construction, and a compromise in size.