1107-0097 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 1107-0097, part of the Synqnet Boards series, is a high-quality steel deep groove ball bearing. It features an open sealing design, with 35mm inner diameter and 72mm outer diameter. The bearing has a dynamic load rating of 29 kN, a static load rating of 16 kN, and a limiting speed of 13,000 RPM.
Internal Product Review
The Danaher series SynqNet-PCI 1107-0097 board is a stable motion control card using a 266 MHz MPC8245 processor. It offers dual SynqNet Ethernet ports and active cooling with a fan. It is certified by CE and UL, it's a reliable solution for synchronized automation systems using PCI communication.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 1107-0097 motion control board by developer company Danaher , is mainly used in multi-axis motion setups especially where precise coordination between the controller and networked drives is needed. Danaher represents a devotion to engineering solutions that can be installed into the systems without complexity.
The 1107-0097 control board utilizes a network interface card built for real-time industrial automation domains. It operates using a Freescale MPC8245 processor which is based on the PowerPC 603e core by running at a frequency of 266 MHz. This processor manages data flow and communication across the motion network and coordinates with the host system through a 32-bit, 33 MHz PCI bus interface. This card uses the SynqNet protocol which provides time-coordinated data exchange over standard Ethernet cabling and connectors. Communication between devices on the SynqNet network is handled through two onboard RJ-45 ports which are labeled as IN and OUT. These ports are connected to a Broadcom BCM5222 dual-port Ethernet PHY by permitting synchronized data transfer among multiple servo drives or modules. A DB15 I/O connector is included on the bracket for auxiliary communication. It allows the controller to access input and output signals directly from sensors or actuators in the loop.
The 1107-0097 control board’s card uses active cooling with a small ball-bearing fan placed above the central processing unit by keeping the temperature in a stable operating range during extended runtime. A combination of onboard RAM and Flash memory stores the firmware and handles temporary data buffering. Clocking components ensure synchronization and timing precision throughout the system. Its labeling meets CE and UL standards which aids in ensuring basic certification with electrical and industrial rules.
