15BRCX-602-BA10A/10 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
0 Seconds
The Danaher 15BRCX-602-BA10A/10 belongs to the Dynapar Resolvers series and features a 1.5 inch aluminum housing with a double servo groove mount style. It has a pilot diameter of 1.449 inches, a rotor bore of 3/8 inch, and a weight of 2.3 ounces. The resolver uses 28 AWG leads that are 12 inches long and is rated for single or multiple speed capability with CCW phasing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15BRCX-602-BA10A/10 is a rotary resolver produced by Danaher within the Dynapar Resolvers series. As a passive electromagnetic transducer, it supplies absolute shaft-angle and velocity feedback to motion controllers in servo drives, packaging stations, and robotic joints. It uses a rotor-primary system and is factory-phased for counterclockwise rotation, simplifying alignment during installation. Inside the machine enclosure, its aluminum body tolerates the oil mist and vibration common in industrial environments.
At the mounting interface, a basic outside diameter of 1.5 in establishes the overall frame size, while a housing length of 0.635 in keeps the unit short enough for crowded motor end bells. The aluminum shell provides good heat transfer and shields the stator windings from electromagnetic interference. The 28 AWG leads exit the housing, balancing current-carrying capacity with flexible routing through small conduits, and each conductor is identified for straightforward resolver-drive wiring. A double servo groove mount centers the resolver without additional adapters, maintaining concentricity between the resolver pilot and the motor shaft. The device supports single-speed or multispeed operation, allowing the use of transformation ratios that match control-loop requirements.
The leads are supplied at a full length of 12 in, providing enough slack for strain-relieved terminations inside the connector hood. A pilot diameter of 1.449 in fits tightly against the motor face, and the rotor’s 3/8 in bore slides over standard shaft extensions without additional machining. With a rotor length matching the housing length, the axial stack remains consistent across compatible motor assemblies. The resolver has a total mass of 2.3 oz, adding little weight to the motor assembly. Its passive design avoids the need for onboard electronics at the sensing point, while the electromagnetic coupling produces continuous angular feedback. The compact housing also allows the resolver to fit within confined motor and machine spaces where longer feedback devices may interfere with nearby components.
