Product Description

The H5615001263 encoder presents a basic sturdy encoder design that serves general-purpose industrial purposes. The encoder’s construction belongs to Danaher which excels as a trusted brand for motors, drives and encoders with the simplest design.

The H5615001263 encoder operates under EN61326-1 standards and reaches 50 G shock resistance to sustain 11 milliseconds of impact during operation. The system can resist a 20G vibration effect within the range of 5 to 2000 Hz. The encoder operates in standard industrial automation settings that are free from hazardous materials and need steady motion feedback signals for its control systems. It generates 1500 PPR pulses during one revolution and transmits A, A complement, B, and B complement signals. This series Dynapar encoder functions through an input voltage range from 5V to 15 VDC and generates voltage signals that transmit through a Line Driver Type 4469 at frequencies below 100 kHz. It implements reverse polarity and short circuit prevention as a safety addition to its overall setup. The shaft has a length of 15.875 mm and its construction begins operation at 14.12 Ncm nominal torque.

The H5615001263 encoder’s glass disk delivers durable working while the housing along with the flange uses aluminum materials which provide strength alongside lower weight. At 13 pounds the encoder has a maximum functioning capacity of 5000 rpm. The encoder features both a radial conduit box and a mating category connector for linkage. The pluggable screw terminal permits termination with a mating connector and allows working within environments where humidity does not lead to condensation. Its temperature exists between 0°C and 70°C and upholds an IP54 safety standard which shields it from dust along with limited water spray.