Product Description

The model H5606001441 is a type of Incremental Encoder for usage in a wide range of electromechanical industries. It is a part of Danaher and its solutions use innovative technology and sinusoidal commutation to gain durable performance.

The H5606001441 incremental encoder utilizes its importance in electrical servo motors and allows the internal components to stay protected during work. The encoder is built with large outer bearings. These bearings help take on the weight and strain from the shaft by reducing wear on the internal parts. This helps the encoder last longer even in places where it may be exposed to physical stress or vibration. It has a 0.63-inch bore size and can be mounted using either a foot mount or a 56C face mount by giving flexibility depending on the equipment setup. The signal direction is bidirectional meaning it can detect movement in both forward and reverse directions. The electrical connection is made through an MS connector often used in industrial setups. The encoder uses differential output which improves the quality of the signal especially in areas with electrical noise.

The H5606001441 incremental encoder also operates in a wide temperature range from -40 to 85 °C by making it suitable for both cold and hot environments. There are ten pins labeled A to J, each with a specific function and pin A carries the Z signal. Its pin B carries the A signal and pin D carries the B signal. Other pins are used for power, signal return and case grounding. Pin J is not connected. This pinout makes it easier to wire the encoder to other equipment correctly.