Product Description

The H22100010421F is an incremental encoder from Danaher's Dynapar H20 Series. In industrial automation systems, it is made for uses that need precise feedback control. The encoder can work with input voltages ranging from 5 to 26 VDC and emits single-ended signals.

The H22100010421F incremental encoder has a 3/8-inch shaft with a single end that is fixed with a flange. It has a bolt circle width of 2 inches, which makes installation stable. The electrical output is an open collector, which enables it to be connected to conventional logic circuits. The termination is a 3-foot insulated wire that comes from the side. The product does not come with a matching connector. The encoder can handle 1,000 pulses per turn and has two channels for incremental signals. It has a shaft seal that keeps dirt and dust out of the internal parts. The signal stream can go in both directions and can sense direction. It does not have any commuting tracks. The detecting method uses light and can produce accurate signals. Internal bearings keep the shaft rotating smoothly. The product meets the NEMA 4 standard and can work in temperatures between 0 and 70 °C.

The H22100010421F incremental encoder does not have a status light and can not withstand a blast. The product can be used in industrial automation systems that need accurate feedback on rotation. The type of mounting is shafted, which lets it connect directly to the device shaft. The protection grade of IP66 is met by the enclosure. The encoder works with devices that need a steady signal output in a sealed environment. The product makes sure that systems that depend on bidirectional input work smoothly.