Product Description

The G0550669 from Danaher ranks among the top Dynapar series encoders due to its impressive performance in industrial settings.

This encoder offers a precision subclass in motion control across 8192 RPM to 10,000 pulses per revolution settings. The G0550669 supports strong signal processing through its four input channels, including AB and an optional Z conduit. The encoder system produces Signal A before Signal B when its shaft turns in the counter-clockwise direction to work with machinery set up in different positions. The quadrature phasing receives a precise 90-degree electrical adjustment within 25 degrees to produce the best possible signal results. The encoder system works with diverse power sources, both for push-pull and line driver applications. It functions within a power range of 10-30 VDC at both 60 mA for push-pull outputs and 40 mA for line driver outputs while having a 5 VDC ±10% voltage tolerance for the driver outputs. The system reacts rapidly to changes at lower than 200 kHz for push-pull mode up to 300 kHz when it is set to line driver mode to meet speed requirements for high-end applications.

The designed mechanism operates through a 3/8 inch shaft able to handle forceful mechanical loads with radial force limits of up to 35 pounds and axial force limits of 24 pounds. Designed for high-speed performance it spins at optimal speeds to 10,000 RPM with a low rotational resistance factor measured at 2.83 x 10^-4 oz–in–sec². Designed with aluminum for the housing and stainless steel for the shaft, the G0550669 remains strong and resists weather in its operating environment. This device works between 0 and 70 degrees Celsius and possesses a NEMA4/IP66 enclosure that prevents dust and supports washdown functions.