Product Description

Danaher E14010002702 is a Encoder made for exact feedback and motion control. This encoder is designed to work reliably in computer systems that need to be accurate and stable. The E14 encoder is often used in industrial machinery that needs to maintain a careful monitor on the speed, position, or direction of rotation.

The E14010002702 encoder has resolution choices that usually lie between 100 and 10,000 pulses per revolution, so it can be used in a variety of ways. The encoder can work with either 5V or 24V DC power, so it can be easily added to normal automation circuits. The encoder has a solid handle that is often used to connect securely to machines that are turning. There is a multi-core cable that is already connected and can carry both power and signal lines. The encoder can usually work in temperatures between -20°C and +85°C, which means it can be used in controlled indoor environments. Some versions of the encoder may be able to handle temperatures from -40°C to +100°C for longer. The encoder is made to handle humidity levels between 0% and 95% that don't cause condensation.

The encoder has weather protection that usually has a rating of IP65 or higher. This prevents the entry of low-pressure water and particles. The colored wires show that there are power and ground connections, as well as typical incremental channels A, B, and Z. The E14 encoder has a CE mark, which means it meets the safety and environmental rules needed for EU markets. The shaft is solid, which allows for better mechanical stress balance and decreases the possibility of slippage during spinning detection. The E14010002702 encoder is designed for uses that need to track rotary motion continuously and give accurate feedback.