Preparing your secure checkout page...
Warranty
Wake Industrial Warranty
To Speak to a sales representative for pricing and lead time:
Product Description
The 625-201F01-5C-1250-E-1-05 belongs to the Dynapar Encoders series from Danaher and represents an accurate and reliable incremental optical encoder.
The HA25 series provides an enclosed shaft seal with glass disk engineering for demanding industrial use. The device provides measurement results from 1 PPR up to 2540 PPR with a setup of 1250 PPR at its best. Its two-channel A/B outputs work with Z ignition and complementary outputs to protect signal quality and optimize equipment use. The specific model comes with options 5 and E to deliver exceptional performance across temperature changes. The standard electrical supplies for high-performance encoders range from 5 to 26 VDC at 80 mA and under. An Open Collector Push-Pull and Differential Line Driver output selection offers up to 100 mA sink and source capacity. The encoder uses a differential output code 5 with extended features to work effectively across different operating scenarios. The encoder delivers stable results at 100 kHz minimum, and its index channel achieves at least 75 kHz performance in extended temperature ranges for smooth fast operations. The product connects to 1/4-inch or 3/8-inch shafts and works with shafts spinning up to 5,000 RPM.
The encoder features high mechanical durability by handling loads of up to 35 pounds radial and 40 pounds axial at 0.25 inches from its front surface. It operates across harsh temperatures between 0degrees C and +85degrees C during use while also storing between -40degrees C and +90degrees C. The device stays stable under 50 G shocks lasting 11 milliseconds while tolerating 98% average humidity without condensation. It resists both 5 to 2000 Hz vibrations at 20 G. Its NEMA4/IP66 enclosure ranking protects it from dust and permits its usage in high-pressure cleanroom environments. The product delivers fast reactions to rotating speed shifts because it carries a moment of inertia value at 3.0 x 10⁻⁴ oz·in·sec². This encoder comes with a special cable and connector connection on its side, thanks to its designated ordering code.
