608600-0100 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 608600-0100 is a cable from the Dynapar Encoder Cables series, featuring an M12 D-coded male connector on the encoder side and flying leads on the opposite end. This cable has four leads, uses 24 AWG wire, and operates within a temperature range of -40 to +80 degrees Celsius.
Internal Product Review
The 608600-0100 is a Dynapar encoder cable with an M12 D-coded male encoder-side connector and flying leads on the non-encoder end. A 4-pin, 24 AWG configuration supports clean signal termination and straightforward integration in encoder installations. Temperature capability from -40 C to +80 C adds dependable service across varied machine environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 608600-0100 cable is manufactured by Danaher and supplied within the Dynapar Encoder Cables series. It is a dedicated lead set for incremental or absolute rotary encoders, providing a preterminated interface on the sensor side and unterminated conductors on the control side. This arrangement allows signals to be routed directly to drives, PLC modules, or terminal blocks in industrial automation systems. The prepared encoder connection reduces the amount of field assembly required and helps limit wiring errors. Its flexible format is suitable for machinery in which the encoder and control cabinet require different connection methods.
The encoder end terminates in an M12 D-coded male plug with a keyed shell that helps maintain correct alignment and resist vibration. The connector uses a four-pin interface that supports the required electrical connections to a compatible Dynapar encoder. Its conductors are made from tinned-copper strands sized at 24 AWG, providing a practical balance between current capacity and routing flexibility. The polyvinyl insulation supports continuous operation at temperatures as low as -40 °C, making the cable suitable for cold rooms and outdoor equipment. Its maximum continuous operating temperature is +80 °C, allowing installation near warm machinery when the cable remains within this limit. The cable can be routed through constrained spaces without requiring large conductors or an oversized connector body.
At the opposite end, the jacket is stripped to expose flying leads, allowing the free conductors to be connected directly within a cabinet. The cable contains four leads, corresponding to the available contacts at the encoder connection. It is supplied with only an encoder-side connector, so the control-side conductors can be fitted with ferrules, soldered where appropriate, or landed directly on compatible terminals. This open-ended arrangement supports control systems that do not use a proprietary plug at the cabinet. The cable geometry provides shielding and conductor twist suitable for carrying encoder signals in industrial environments. Proper grounding and separation from high-current motor wiring can help reduce electrical interference along the signal path.
