Product Description:

The 608557-0002 cable is produced by Danaher as part of the Dynapar Encoder Cables series. It serves as an encoder interconnect that routes incremental or absolute position feedback between a rotating transducer and a motion controller in industrial automation cells. By matching the sealed circular connectors commonly used on encoder housings, the assembly maintains signal integrity and provides a secure machine-side connection. Using a dedicated feedback harness simplifies wiring in packaging lines, conveyors, robotic axes, and other motion-control applications.

This product is supplied as a terminated cable assembly, so its conductors and connectors are ready for installation without on-site crimping or soldering. Each end has an M12 D-coded male plug that is keyed to preserve Ethernet or differential signal polarity in demanding industrial enclosures. The mating faces use a male-to-male configuration, permitting direct panel-to-device connections without gender adapters. The cable has an overall length of 2 meters, providing sufficient reach for routing inside standard electrical cabinets or along axis carriages. Its 4-pin layout carries the required signal and power connections while helping minimize the jacket diameter and required routing space.

The thermoplastic insulation tolerates continuous conductor temperatures up to +80 °C, allowing the cable to operate near motors or drives that radiate moderate heat. At the lower end of its operating range, flexibility is retained down to -40 °C, making the assembly suitable for outdoor gantries or unheated warehouses. The cable uses stranded copper conductors that support flexibility when routed through moving machinery or confined cabinet spaces. These conductors are sized at 24 AWG, balancing electrical capacity with a practical bend radius for repetitive-motion tracks. The compatible connector arrangement and conductor layout match the pinout and communication requirements of supported Dynapar encoders.