608556-0001 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 608556-0001 is a cable assembly from the Dynapar Encoder Cables series with a female M12 A-coded connector and four 24AWG leads. Its non-encoder end features flying leads, and the wire is rated for temperatures ranging from -40 to +80 degrees Celsius.
Internal Product Review
The 608556-0001 is a Dynapar encoder cable assembly with an M12 connector. The A-coded encoder end and flying leads support clean mating and straightforward field termination. A -40C to +80C wire rating makes this cable a strong fit for varied industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 608556-0001 encoder cable is produced by Danaher as part of the Dynapar Encoder Cables series. It links a rotary encoder to a drive, PLC, or motion controller so that differential or single-ended position signals reach the control rack without degradation. A molded connector on one end and stripped conductors on the other reduce field wiring time in equipment such as indexing tables, conveyors, and packaging axes. This arrangement also supports direct routing between an encoder and the control enclosure without requiring an additional junction connector.
On the encoder side, the harness terminates in an M12 circular plug with an A-coded keying pattern that prevents connection to incompatible sensor types. The connector has a female interface with a 4-pin layout suited to incremental feedback connections. Four color-coded conductors carry channel A, channel B, the power supply, and the common connection. Each conductor is sized at 24 AWG, keeping the cable bundle compact while supporting low-current logic transmission over typical machine distances. The separate conductors allow each signal and power connection to be terminated individually at the control end.
The opposite end has flying leads, allowing the conductors to connect to terminal blocks, solder lugs, or crimp contacts according to the panel wiring arrangement. Classified as a cable assembly, the product uses continuous-flex wire for moving machinery and repeated cable routing. The cable remains operational at temperatures as low as -40 °C and as high as +80 °C, covering cold storage equipment and warm industrial environments. Its silicone-free outer insulation resists oil and coolant splashes while protecting the core insulation during repeated bending. The combination of a molded encoder connector and individually accessible leads supports mobile carriages, static encoder installations, and equipment with compact terminal spaces.
