1400635-0025 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 1400635-0025 is a cable assembly from the Dynapar Encoder Cables series. It features a 25 foot opal cable with 10 pins and an MS female connector on the encoder side, with flying leads on the non-encoder side. This shielded cable supports differential output and has 8 leads and a total wire count of 10.
Internal Product Review
The 1400635-0025 is a Danaher Dynapar encoder cable assembly designed for dependable encoder interconnection in industrial control systems. A female MS encoder-side connector and flying-lead termination support straightforward installation and clean panel integration. Differential output and shielded construction promote stable signal transmission, making this cable a strong choice for accurate encoder feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 1400635-0025 cable assembly is supplied by Danaher as part of the Dynapar Encoder Cables series. It provides an interface between an optical or magnetic encoder and a receiving drive or PLC, carrying incremental or absolute position data in demanding automation cells. The molded backshell protects the encoder-end connection from mechanical strain during routing and operation. Individually insulated conductors help maintain signal separation inside motion-control cabinets and along moving machine axes. The assembled design also reduces the amount of cable preparation required during installation.
The Opal-colored outer jacket distinguishes feedback wiring from power cables in crowded cabinets and drag chains. A total length of 25 ft provides enough reach across many medium-sized gantries without intermediate junctions. On the encoder side, the harness terminates in a female MS connector with a threaded circular coupling that resists loosening under vibration. The connector follows a common military-style pin arrangement used by many Dynapar transducers. Signals travel through differential signal pairs, which help reject electromagnetic interference collected along the cable route. The conductors are protected by a braided foil layer, making the assembly a fully shielded cable that reduces common-mode noise affecting the A, B, and Z channels at high pulse rates.
The signal breakout provides 8 leads for connection to controller screw terminals, while a separate pair completes the power and reference circuit. These conductors correspond to the encoder-side 10-pin connector without leaving unnecessary cores inside the jacket. The product is supplied as a complete cable assembly with strain relief and overmolding already incorporated into the harness. The controller end uses flying leads, allowing the conductors to be connected to ring lugs, solder cups, or plug-in terminal inserts according to the cabinet interface. This open-ended arrangement accommodates different controller terminal layouts without requiring a fixed connector at the receiving end. The shielding and differential conductor arrangement support stable feedback transmission where nearby motors, contactors, and drive cables generate electrical noise.
