1400419-0005 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 1400419-0005 is a cable from the Dynapar Encoder Cables series with a length of 5 feet and 24 AWG wire gauge. It features a 10-pin female MS connector on the encoder side and flying leads on the non-encoder end, supporting full differential signal type. The cable has eight leads and a maximum wire temperature of 80°C.
Internal Product Review
The 1400419-0005 is a Danaher Dynapar encoder cable with a female MS connector on the encoder side and flying leads on the opposite end. Full differential signaling and 24 AWG conductors support clean feedback transmission and straightforward integration in motion-control wiring. A +80C max wire temperature adds dependable thermal margin, making this cable a strong fit for encoder installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 1400419-0005 is a shielded feedback cable manufactured by Danaher for incremental and absolute encoders in the Dynapar Encoder Cables series. It connects the rotating sensing element to a drive or PLC input module, carrying differential position signals while maintaining controlled impedance. A circular connector on the encoder side and unterminated conductors at the controller end support direct installation in industrial automation systems. The shield helps protect low-level feedback signals from electromagnetic interference produced by nearby motors, drives, and power cables.
The encoder interface uses a 10-pin layout inside a military-style female MS connector. A threaded coupling nut secures the connection, while strain relief protects the cable near the transducer housing. Inside the PVC jacket, twisted pairs consist of tinned copper strands sized at 24 AWG, balancing voltage drop with the flexibility needed for routed cable paths. The cable maintains a full differential signaling environment from the sensor to the controller, supporting the balanced signals used by many encoder line drivers. The overall assembly length is 5 ft, which limits propagation delay and suits panel-mounted drives positioned near the motor.
The cable includes 8 color-coded conductors that accommodate typical A, B, Z, and power connections. The control-cabinet end has flying leads, allowing the individual wires to be crimped, soldered, or routed directly to terminal blocks without additional adapters. This termination style also permits the conductors to be arranged according to the input configuration of the connected drive or PLC module. Heat-resistant insulation supports continuous conductor temperatures up to +80 °C, allowing the cable to operate near transformers and braking resistors when adequate routing clearance is maintained. Its connector format, conductor arrangement, shielding, and insulation are compatible with the intended Dynapar encoder connections.
