112076-0015 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The 112076-0015 is a cable produced by Danaher as part of the Dynapar Encoder Cables series. It has a side-mount MS Bayonet female connector on the encoder side and flying leads on the non-encoder end. This cable features 19 leads and uses 24 AWG wire gauge.
Internal Product Review
The 112076-0015 is a Danaher Dynapar encoder cable with a side-mount MS bayonet female encoder-side connector. Flying leads on the non-encoder end simplify field wiring, and 24 AWG conductors support clean cable routing. The included mating connector and 19-pin layout make this cable a strong choice for encoder installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 112076-0015 cable assembly is manufactured by Danaher and belongs to the Dynapar Encoder Cables series. It is a preterminated harness for connecting Dynapar rotary encoders to motion controllers in automated machinery. The cable carries power, incremental feedback channels, and auxiliary signals between the encoder and the controller. Its conductor arrangement and mating hardware provide the connections needed by drives that use precise position or speed feedback, while the assembled format reduces the need to prepare individual conductors at the machine.
On the encoder side, a side-mounted layout positions the connector shell so the body can clear tight flange patterns without sharply bending the conductors. Termination is provided through a female MS bayonet connector with a quarter-turn locking mechanism that resists separation caused by machine vibration. The internal bundle contains 19 leads, providing conductors for the A, B, and Z incremental tracks, complementary channels, power, and optional auxiliary signals such as temperature monitoring. Each conductor is sized at 24 AWG, balancing current capacity with the flexibility needed for routing through machine frames and cable-management systems. The connector arrangement also allows the cable to be secured or removed without repeatedly twisting the harness during installation or maintenance.
The controller end has flying leads, allowing the conductors to be crimped, soldered, or connected directly to terminal blocks that match the control cabinet layout. Electrical continuity is maintained through a 19-pin contact pattern that corresponds to the lead count, preserving one-to-one signal routing from the encoder connection to the open controller end. A mating connector is included with the assembly, providing the keyed connection required at the encoder housing. The cable’s open-ended controller design accommodates installations in which terminal arrangements vary while the encoder interface remains fixed. Individual flying leads also permit each signal conductor to be routed to the appropriate input, power terminal, shield connection, or auxiliary circuit without requiring a fixed controller-side plug.
