112076-0005 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 112076-0005 is a cable assembly from the Dynapar Encoder Cables series featuring a 19-pin MS Bayonet female connector on the encoder side. This side-mount accessory has 19 leads with 24 AWG wire gauge and flying leads for non-encoder termination.
Internal Product Review
The 112076-0005 is a Danaher encoder cable assembly with an MS bayonet female encoder-side connector and flying lead termination. Its 19-pin, 24 AWG construction supports clean signal routing and makes this cable a strong choice for dependable encoder interfacing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 112076-0005 cable assembly is produced by Danaher for the Dynapar Encoder Cables series. Intended for industrial automation, this product links Dynapar rotary encoders to drive controllers or PLC input cards, conveying incremental or absolute position data without requiring additional signal conditioning. A sealed connector at the encoder end and individually insulated conductors help maintain signal integrity and limit electromagnetic interference in electrically noisy machinery. The dedicated harness also reduces wiring complexity and helps prevent crossed connections during installation. Encoder feedback can then reach the connected control system through an organized set of conductors.
The unit is classified as a cable assembly, with its conductors, shielding, and terminations prepared as a single component rather than supplied as bulk cable and loose connectors. On the encoder side, it uses an MS bayonet female connector that locks with a quarter turn and resists loosening under vibration in mobile or high-speed axes. This receptacle has a 19-pin configuration that provides separate paths for channels such as A, B, Z, complementary signal pairs, and power. The cable uses stranded tinned copper conductors sized at 24 AWG, balancing current capacity with the flexibility required for dynamic cable tracks. Tinned conductors also provide a suitable surface for dependable electrical terminations and help resist oxidation in industrial environments.
The assembly is supplied as a cable accessory that installs beside the encoder housing with a designated side-mount strain relief bracket. This arrangement allows the cable bundle to exit parallel to the motor face while supporting the cable near the connection point. The controller end terminates in flying leads, allowing each conductor to be cut to the required length and connected to screw, spring, or crimp terminals according to the cabinet layout. Signal and power paths are carried through 19 leads, matching the complete set of contacts at the encoder connector. The prepared assembly maintains wire-to-pin continuity between the connector contacts and the corresponding flying leads. Its flexible termination arrangement supports direct connection to different controller input terminals without requiring a fixed controller-side plug.
