110158-0020 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 110158-0020 is part of the Dynapar Encoder Cables series and features a cable length of 20 feet with a 19-pin side-mount connector. This cable is compatible with AI25 Absolute Encoders with 10 or 12 bit resolution, has a MS Bayonet female connector, and uses 24 AWG wire with 18 leads. The non-encoder end features flying leads and the output type is parallel push-pull.
Internal Product Review
The 110158-0020 is a Dynapar encoder cable built for the AI25 Absolute Encoder with Parallel Push-Pull output support. An MS Bayonet female encoder-side connector and flying-lead termination make installation straightforward and maintain dependable signal transfer. A well-matched cable for precise encoder interfacing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 110158-0020 cable is manufactured by Danaher within the Dynapar Encoder Cables series. It functions as the fixed wiring link between a Dynapar AI25 absolute encoder and downstream control hardware, carrying position data, supply power, and status signals in a single harness. The purpose-built assembly provides repeatable shielding and consistent pin assignments while reducing the wiring work required for automated equipment. Its integrated design also avoids the inconsistent conductor routing and shielding that can occur with field-assembled connections.
An overall length of 20 ft supports encoder placement on machine axes while allowing the associated control hardware to remain inside a remote panel. At the sensor end, the cable has a 19-pin circular connector with an MS bayonet female connection for fast, vibration-resistant engagement. Internally, the bundle contains 18 leads, providing separate conductors for parallel data, power, and control signals used by the encoder. Each conductor consists of stranded 24 AWG copper, balancing cable flexibility with resistance to voltage drop over the full cable length. The opposite end is terminated with flying leads for direct connection to terminal blocks, insulation-displacement connectors, or screw-clamp terminals in the control enclosure.
The connector body has a side-mount orientation, allowing the cable to exit perpendicular to the encoder housing and reducing the axial clearance required behind the unit. The electrical arrangement is compatible with the AI25 absolute encoder, which transmits position words with 10-bit or 12-bit resolution through the parallel conductors without serial conversion. Encoder line drivers use a parallel push-pull electrical format, and the cable arrangement supports the corresponding source-and-sink signal behavior. Shielding helps protect the parallel data lines from electrical noise generated by nearby motors, drives, contactors, and other industrial equipment. The flying-lead termination also permits the individual conductors to be routed to the control terminals required by the machine’s wiring layout.
