★★★★★
4.94 based on 226 reviews

🙶 Wake was very helpful in getting us a servo motor and drive for our tube mill line. This was the first tim... 🙷

109209-0025 Danaher

In-Stock, Ships 3-5 Days

Preparing your secure checkout page...

The Danaher 109209-0025 is a cable assembly from the Dynapar Encoder Cables series with a NEMA 4 watertight protection rating and is equipped with a 10-pin female MS connector on the encoder side. This assembly supports differential line driver output types, includes flying leads for the non-encoder termination, and offers index compatibility.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The 109209-0025 is an encoder interconnect cable manufactured by Danaher for the Dynapar Encoder Cables series. It routes incremental position signals from a rotary or linear feedback device to motion controllers or drives in industrial automation systems. By matching the electrical interface and sealing requirements of typical plant-floor encoders, the cable helps maintain signal integrity between the sensing element and downstream electronics. It is suitable for conveyors, packaging machines, and material-handling axes, combining power, quadrature, and index conductors within a single jacket to simplify field wiring.

On the encoder end, the assembly terminates in a female MS connector that follows the military-style circular format used on many Dynapar models. The connector has a 10-pin layout, providing individual contacts for channels A and B, the index channel, complementary returns, and supply lines. The conductors support a differential line-driver interface, allowing balanced signal transmission that resists electrical noise over long cable runs. Inside the jacket, there are 9 insulated leads, while the tenth connector pin is reserved for the shell ground provided through the connector body. At the controller end, the conductors are stripped and tinned as flying leads, allowing each wire to terminate directly on terminal blocks or screw-clamp plugs without additional adapters.

The cable provides support for index outputs, allowing the dedicated Z-channel to run alongside the quadrature pair for homing and reference-position routines. Its outer sheath carries a NEMA 4 watertight rating, protecting the internal conductors from dust and direct water spray in washdown areas. The product is supplied as a factory-terminated cable assembly with conductors, shielding, and connectors prepared for installation. Integrated strain relief helps protect the conductor terminations from mechanical stress where the cable enters the connector housing. The combined shielding and differential signal arrangement helps drive modules receive stable, phase-aligned feedback in automation systems exposed to electrical interference.

Compatible Output Type
Differential Line Driver
Connector Pin Count
10
Encoder-side Connector
MS Connector (Female)
Index Compatibility
With Index Outputs
Lead Count
9
Non-encoder Termination
Flying Leads
Product Form
Cable Assembly
Protection Rating
NEMA 4 Watertight

Frequently Asked Questions about 109209-0025:

Q: What type of output is the 109209-0025 encoder cable compatible with?

A: This cable assembly features a differential line driver output type.

Q: What connector type is used on the encoder side of the 109209-0025 cable?

A: The 109209-0025 cable includes a 10-pin MS female connector on the encoder side.

Q: Is the 109209-0025 cable compatible with encoders providing index outputs?

A: The cable supports encoders that require index outputs.

Q: How is the 109209-0025 cable terminated on the non-encoder side?

A: The non-encoder end of the cable has flying leads for termination.

Q: What protection rating does the 109209-0025 encoder cable offer?

A: This model meets the NEMA 4 standard for watertight protection.


Internal Product Review

  • ‘‘The 109209-0025 is a Dynapar encoder cable assembly built for differential line driver systems. The female MS encoder-side connector with a 10-pin configuration supports clean, secure integration in encoder circuits. NEMA 4 watertight protection makes this cable assembly a strong choice for industrial installations.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo