★★★★★
4.94 based on 226 reviews

🙶 Excellent to work with and they stand behind their work. I would highly recommend them. 🙷

108616-0020 Danaher

Ask for Availability

Preparing your secure checkout page...

The Danaher 108616-0020 cable is part of the Dynapar Encoder Cables series and is designed for use with H58 encoders. It features a 12-pin M23 female connector on the encoder side, 8 leads, and flying leads on the non-encoder termination. The cable uses 22 AWG and 24 AWG wire gauges and supports any output type.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The 108616-0020 is an encoder interconnect cable manufactured by Danaher for the Dynapar Encoder Cables series. It provides a dedicated connection between a rotary feedback device and a control cabinet, carrying incremental or absolute position signals to drives or PLC modules in industrial automation systems. The preassembled cable supports fast, tool-free installation without field wiring changes, while its connectors and conductors maintain shielding continuity and consistent conductor assignments from the sensor head to the controller.

Compatibility with the H58 incremental encoder ensures that the mechanical keying and pin functions match the device’s mating receptacle. The encoder end uses an M23 female plug with a thread that turns in the clockwise direction, allowing the connector to be tightened securely using the standard rotation. A 12-pin contact layout provides separate connections for the differential A, B, and Z signals, along with power and shielding. The internal conductors use 22 AWG and 24 AWG wire sizes, combining lower electrical resistance on the supply pair with the flexibility needed for routing signal pairs. This conductor arrangement helps preserve supply voltage and signal-edge fidelity over typical machine cable lengths.

The cable has 8 leads at the controller end, where they are terminated as flying leads for direct routing to terminal blocks, solder cups, or plug-in screw connectors. This open termination supports any compatible output format generated by the H58 encoder, including single-ended TTL, differential HTL, or analog sine-cosine signals, because individual conductors can be paired and shielded as needed. The cable’s insulation and drain-wire scheme supports signal separation and provides a continuous path for shield grounding. Panel wiring can therefore be arranged for the controller interface without requiring a proprietary connector at the open end. The combination of dedicated signal conductors, power leads, and shielding helps reduce interference when the cable is routed near motors, drives, or other electrically noisy equipment.

Compatible Encoder
H58
Connector Direction
CW
Connector Pin Count
12
Encoder-side Connector
M23 (Female)
Lead Count
8
Non-encoder Termination
Flying Leads
Output Type
Any Output
Wire Gauge
22 AWG & 24 AWG

Frequently Asked Questions about 108616-0020:

Q: Which encoder is the 108616-0020 cable designed to work with?

A: The 108616-0020 cable is compatible with the H58 encoder model.

Q: What type of connector does the 108616-0020 cable use on the encoder end?

A: This cable features an M23 female connector on the encoder side.

Q: How many pins does the connector on the 108616-0020 cable have?

A: The connector on the 108616-0020 cable has 12 pins for reliable signal connection.

Q: How is the 108616-0020 cable terminated on the non-encoder side?

A: The non-encoder end of the 108616-0020 cable terminates with flying leads, allowing flexible connection options.

Q: What wire gauges are used in the 108616-0020 encoder cable?

A: This model utilizes wires with 22 AWG and 24 AWG gauges for signal transmission.


Internal Product Review

  • ‘‘The 108616-0020 is a Dynapar encoder cable built with an M23 female encoder-side connector and flying-lead termination. Compatibility with H58 encoders and support for any output make the cable a flexible, well-engineered choice for encoder integration.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo