108615-0030 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 108615-0030 is part of the Dynapar Encoder Cables series and is compatible with H58 and HS35 encoders. It features a 12-pin M23 female connector with counterclockwise orientation, 10 leads excluding shield, and flying leads for the non-encoder end. This cable uses 22 AWG and 24 AWG wire gauge and supports any encoder output.
Internal Product Review
The 108615-0030 is a Dynapar encoder cable with an M23 female encoder-side connector and flying-lead termination. Compatibility with H58 and HS35 encoders plus support for any output makes integration especially straightforward in mixed feedback installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 108615-0030 feedback cable is manufactured by Danaher for the Dynapar Encoder Cables series. It links rotary encoders to motion controllers, carrying incremental or absolute position data while preserving signal integrity through controlled impedance and shielding. By completing the electrical path between the sensor and drive, the cable helps maintain accurate closed-loop speed or position regulation on conveyors, machine tools, and packaging systems where precise automation is required.
On the encoder side, the cable terminates in an M23 female circular connector that is keyed for a CCW orientation, allowing secure mating with the sensor body. This connector has 12 pin positions, but only 10 leads are active for data and power, leaving two contacts unused within the insert pattern. Conductor sizing follows common control-wiring practices. Signal pairs use 22 AWG copper, while supply or reference lines use 24 AWG conductors to balance electrical performance and flexibility. These sizes allow the assembly to pass through conduit and cable tracks while remaining suitable for encoder circuits. Shield continuity and characteristic impedance are maintained along the full cable length, allowing the harness to carry differential, single-ended, or open-collector output signals without physical modification.
The cable is intended for direct use with Dynapar encoder models H58 and HS35, ensuring that the pin assignments align with their power, index, and quadrature channels. At the controller end, it is supplied with flying leads, allowing the jacket to be cut to the required length and the individual conductors to be connected to terminal blocks, screw clamps, or solder lugs according to the panel layout. The unterminated controller end also supports custom routing when connection points differ among control cabinets. Its twisted-pair arrangement helps limit interference between signal channels in multi-axis installations. The flexible termination format accommodates different controller interfaces without changing the encoder-side connector.
