108596-0025 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danaher 108596-0025 encoder cable belongs to the Dynapar Encoder Cables series and features a 7-pin MS female connector on the encoder side and flying leads on the other end. This shielded cable has a maximum wire temperature of 105°C, a minimum wire temperature of -20°C, and supports a differential output with a line driver.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 108596-0025 belongs to the Dynapar Encoder Cables series produced by Danaher. It is a dedicated interconnect lead set for incremental or absolute feedback devices and links the encoder body to downstream motion controllers or drives inside automated equipment. By matching the manufacturer’s electrical driver standards and mechanical connector styles, this cable maintains signal integrity over typical machine lengths and provides compatible wiring between the sensor and control cabinet. Its configuration supports feedback transmission in automated machinery where reliable communication between the encoder and motion-control hardware is required.
This assembly terminates on the encoder side with a 7-pin circular female MS connector, a military-style shell that locks with a threaded coupling and aligns each conductor with its keyed insert. Inside the jacket, the conductors are arranged as a line-driver channel pair, allowing the encoder to send balanced, high-current square waves to noise-sensitive receivers. The driven signals leave the cable as differential outputs, supporting common-mode noise cancellation in environments with switching transients or variable-frequency motor currents. At the opposite end, stripped and tinned flying leads simplify field termination to screw clamps, terminal blocks, or solder posts. This physical layout accommodates A and B tracks, their complementary signals, power, and ground while maintaining consistent conductor impedance for low phase delay.
Circuit shielding is provided by a braided shield that intercepts electromagnetic interference and is typically grounded at the drive panel to reduce crosstalk. The conductor insulation tolerates continuous service at temperatures up to 105 °C and remains flexible at temperatures as low as -20 °C, covering most indoor machine environments without supplemental heating. The cable has no index-pulse position marker, so the seven internal leads carry only the two quadrature channels, their complementary signals, the supply connection, and the common return. The matching lead count keeps wire assignments straightforward when the cable is routed through cable tracks or sealing glands. The threaded connector also helps prevent accidental separation when the assembly is exposed to normal machine vibration.
