108595-0035 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 108595-0035 is a cable assembly from the Dynapar Encoder Cables series, compatible with H20, H58, and HS35 encoders. It features a 7-pin MS female connector for the encoder side, flying leads on the non-encoder side, and uses 22 AWG and 24 AWG wire gauges. The assembly comes with a mating connector included and supports single-ended output.
Internal Product Review
The 108595-0035 is a Danaher cable assembly designed for H20, H58, and HS35 encoders. A female MS connector on the encoder side and flying leads on the opposite end support clean field termination and dependable signal routing. Single-ended output and an included mating connector make the package well suited for straightforward encoder integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 108595-0035 is an encoder interconnection lead manufactured by Danaher within the Dynapar Encoder Cables series. It serves as the dedicated link between a rotating feedback device and the controller that interprets incremental counts or absolute position data. Within an automated line, this specialized cable routes low-level encoder signals through machine cabinetry, protecting them from electrical noise while providing a connector interface that simplifies installation. The assembly also accommodates dynamic axis movements and maintains signal integrity during repeated flexing cycles.
As a cable assembly, this product integrates the conductors, shielding, and strain relief into a single routed component, reducing the risk of wiring errors. On the encoder side, it terminates in a military-style female MS connector fitted with a keyed shell. The contact insert has a 7-pin pattern, allowing each signal line and reference return to occupy its own socket. The field end has flying leads, allowing the wires to be crimped, soldered, or connected to terminal blocks that match the host drive. Signal routing follows a single-ended topology, meaning each channel is referenced to a common ground rather than carried as a differential pair. This arrangement is commonly used with short-run incremental encoders installed in shielded conduit.
The cable is compatible with the H20, H58, and HS35 encoder families, allowing one harness design to support several encoder frame sizes without pinout changes. Inside the jacket, the bundle contains six insulated conductors for routing the standard A, B, and Z channels and their associated connections. The cable comes with an included mating connector, so the required connection hardware is supplied with the assembly. Each conductor has a size of 22 AWG, providing suitable current capacity for TTL or open-collector drivers while maintaining a compact bend radius. The shielding helps isolate low-level feedback signals from nearby motor leads, switching devices, and other sources of electromagnetic interference. Strain relief supports the cable near its termination points and reduces mechanical stress on the internal conductors when the connected axis moves.
