108594-0045 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 108594-0045 is a cable from the Dynapar Encoder Cables series that is compatible with H20 and HS35 encoders. It features a female MS connector on the encoder side, flying leads on the other end, and supports single ended signals. This cable has 5 leads, a 6-pin configuration, and uses 22AWG and 24AWG wire gauges.
Internal Product Review
The 108594-0045 is a Danaher Dynapar encoder cable designed for H20 and HS35 encoders. The female MS encoder-side connector and flying-lead non-encoder end support straightforward installation and dependable field wiring. Single-ended signaling with 22AWG and 24AWG conductors makes this cable a practical choice for stable encoder interfacing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 108594-0045 encoder cable is manufactured by Danaher for the Dynapar Encoder Cables series. Supplied as a ready-to-install assembly, it links rotary encoders to drive controllers, carrying position and velocity data to PLCs and motion cards used in automated material-handling, packaging, and process lines. By matching the mechanical and electrical interfaces of common shaft-feedback devices, the cable reduces installation time and preserves signal integrity inside industrial cabinets and along moving machine axes.
One end of the harness features a female MS connector that threads directly onto compatible housings and seals the contacts against oil mist. The insert uses a 6-pin layout, assigning power and channel outputs according to the Dynapar pin map. Internal solder cups attach to five color-coded leads, simplifying continuity checks during maintenance. Power lines use 22 AWG and 24 AWG tinned-copper conductors, so voltage drop across a typical 10-meter run remains within encoder limits while the cable retains enough flexibility for tight bends in energy chains. The signal conductors support single-ended transmission, while the conductor arrangement and overall shield minimize crosstalk despite the shared ground reference.
At the controller side, the jacket is stripped to expose flying leads, allowing connection to terminal blocks, solder lugs, or crimp contacts without altering the molded connector. This open termination supports retrofit installations where panel space is limited and maintains compatibility with H20 encoders and HS35 encoders in hollow-shaft or flange-mounted configurations. Each conductor has pre-tinned strands that readily accept solder, while clear heat-shrink markers identify the channel A, channel B, and index connections. The open cable end also allows the conductors to be routed individually through narrow wire ducts before they are secured at the controller. Its connector seal helps protect the encoder-side contacts in machinery exposed to oil mist, while the shield supports stable feedback signals near industrial power wiring.
