108594-0025 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 108594-0025 is a cable from the Dynapar Encoder Cables series by Danaher and features flying leads cable termination. It is compatible with H20 and HS35 encoders and includes a 6-pin female MS connector on the encoder side. The cable supports single ended signal type and uses 22 AWG and 24 AWG wire gauge.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 108594-0025 is a preassembled encoder cable produced by Danaher and supplied under the Dynapar Encoder Cables series. It serves as the interconnect between shaft encoders and drive electronics in automated machinery, carrying incremental position signals from the sensor to motion controllers or PLC input cards. By matching the mechanical and electrical interfaces of specific Dynapar encoders, the cable simplifies installation and reduces wiring errors. Its assembled format also eliminates the need to prepare the encoder-side termination in the field, while the open controller end supports direct connection to different control devices.
The cable is terminated on the controller side with stripped conductors. This open-end style uses flying leads that can connect directly to screw terminals or solder lugs without an intermediate plug. At the opposite end, an MS circular receptacle has 6 keyed contacts that mate with the encoder connection. The female MS connector provides the shell type and contact arrangement required by compatible encoder housings. The power and reference conductors use 22 AWG and 24 AWG wire sizes, which help limit voltage drop while maintaining enough flexibility for routing through cable tracks. Signal transmission uses a single-ended scheme, so each channel references a common return instead of using a complementary differential pair. Drives that accept TTL or open-collector encoder signals can use this arrangement without additional signal converters.
The assembly is pin-to-pin compatible with Dynapar models such as the H20 and HS35. This compatibility aligns quadrature outputs, index pulses, and supply lines with the corresponding drive connections when the cable is installed. Internally, the sheath contains 5 insulated conductors, while the outer braid provides shielding without requiring a separate drain wire. This conductor and shielding arrangement helps keep the cable diameter small enough for routing around machine frames and through confined cable paths. The cable maintains the color codes and insulation characteristics used in the related factory documentation. Consistent conductor colors make each connection easier to trace when the cable is landed at the controller terminals.
