108241-0070 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 108241-0070 is a shielded encoder cable from the Dynapar Encoder Cables series. It features a 6-pin MS female connector with 6 flying lead ends, and supports single-ended output. The cable is constructed with 22/24 AWG wire and provides index support.
Internal Product Review
The 108241-0070 is a Dynapar encoder cable with shielded construction and a 6-lead configuration. An MS female encoder connector paired with flying leads supports clean termination and dependable signal routing. Single-ended output with index support makes this cable a practical choice for encoder feedback applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 108241-0070 is an encoder cable assembly produced by Danaher for the Dynapar Encoder Cables series. It links incremental or absolute encoders to motion controllers and PLC I/O modules, carrying feedback signals while maintaining noise immunity in factory environments. Within automated machinery, the cable transmits position, velocity, and reference information so drives can coordinate servo axes, stop stations accurately, and synchronize tooling. Its preassembled design provides a consistent connection between the encoder and the receiving control hardware.
This model uses a shielded construction that surrounds the conductors with a conductive braid to reduce electromagnetic interference from nearby motors, drives, and power cables. At the encoder end, it terminates in a female MS connector, a threaded cylindrical plug that resists vibration and provides a secure connection. The assembly has 6 leads, allowing power, signal, and reference returns to use separate electrical paths. Signal transmission uses single-ended signaling, meaning each channel is referenced to a common conductor rather than transmitted as a complementary pair. The copper cores are sized at 22/24 AWG, balancing current capacity with the flexibility needed for routing through machinery. The combination of shielding and dedicated conductors helps preserve signal quality when the cable is installed near electrically noisy equipment.
The harness has stripped and tinned flying leads on the controller side, allowing installation with ring terminals, screw clamps, or solder joints. Mating hardware inside the circular shell provides 6 pins for the required electrical connections. An index channel is carried in the bundle, giving the control system a once-per-revolution reference pulse for homing or fault-recovery routines. The threaded encoder connector helps prevent accidental disconnection when machinery produces sustained vibration. Tinned conductor ends simplify attachment to the selected controller interface and reduce loose copper strands at terminal points. The cable can connect compatible Dynapar, NorthStar, or Hengstler feedback devices without requiring a custom adapter at the encoder end.
