107865-0065 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher 107865-0065 is an encoder cable assembly from the Dynapar Encoder Cables series. It features a 17-pin female MS connector on the encoder side and flying leads on the non-encoder side. This cable uses 24 AWG wire gauge and supports a parallel push-pull output type.
Internal Product Review
The 107865-0065 is a Danaher Dynapar encoder cable assembly built for parallel push-pull output applications. A 17-pin female MS encoder-side connector supports secure and accurate interface connection. Flying leads on the non-encoder end and 24 AWG conductors make termination straightforward while preserving dependable signal handling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 107865-0065 is an encoder interconnect produced by Danaher within the Dynapar Encoder Cables series. It is a shielded, multiconductor assembly intended to connect a rotary or linear feedback device to its associated drive or PLC, allowing accurate position data exchange and power delivery in automated machinery operating with fast sample cycles. By consolidating sensor signals into one factory-terminated harness, the product reduces cabinet wiring work and helps maintain signal integrity when routed through moving cable tracks.
This assembly is categorized as a cable assembly and is fitted with an end-mount circular shell that slides directly into an encoder bulkhead without placing rotational stress on the conductors. The sensor interface uses a keyed female MS connector with 17 gold-plated contacts that carry excitation, index, and quadrature signals alongside auxiliary reference lines. The internal conductor group has the same number of conductors as the connector has contacts, eliminating unused cores and helping reduce the overall cable diameter. The jacket is marked with the manufacturer’s branding so the assembly can be identified during installation and inspection.
At the controller end, the harness terminates in flying leads, allowing each signal to connect to terminal blocks, high-density headers, or solder lugs according to the panel layout. The stranded copper conductors are sized at 24 AWG, providing adequate current capacity for 5 V supply rails while maintaining a small bend radius for dynamic motion applications. Data lines use a parallel push-pull drive scheme, so both logic states are actively driven to improve noise immunity over long cable runs. Classified as a field-installable cable, the assembly has a molded PVC jacket that provides abrasion resistance and tolerates repeated flexing inside cable carriers.
