800-1537 Copley Controls
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Copley Controls 800-1537 is part of the Accelnet CanOPEN Modules series and delivers a continuous output power of 1.06 kW with a continuous current of 12 Adc. It features a peak output power of 2.95 kW, a nominal bus voltage of 90 VDC, and measures 168 by 99 by 31 mm. The module supports a current loop rate of 15 kHz and a step command rate of 2 MHz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 800-1537 is a compact servo drive module produced by Copley Controls within the Accelnet CanOPEN Modules series. It interfaces with motion controllers over the CAN bus and conditions DC bus power to drive brushless or brushed motors used in automated machinery. By managing motor current and velocity in real time, the unit regulates axis motion, supports position holding, and ensures repeatable throughput on industrial equipment.
This drive supplies a continuous motor phase current of 12 A DC while drawing 13.3 A DC from the DC link, and it delivers up to 1.06 kW of continuous mechanical output. The power section is rated for a nominal bus voltage of 90 V DC and has an output resistance of 0.036 Ω, minimizing power losses within the output stage. During short-term overloads, it supplies a peak motor current of 36 A DC and can deliver 2.95 kW for one second while drawing a momentary 40 A DC from the supply. A minimum load inductance of 200 µH must be present to keep current ripple within safe limits during operation.
Closed-loop operation uses a current loop running at 15 kHz, a position loop executed at 3 kHz, and pulse-width modulation switching at 30 kHz. The high switching rate moves switching harmonics beyond most motor acoustic ranges while supporting responsive current regulation. The controller also accepts step-and-direction pulses at up to 2 MHz, enabling high-resolution incremental positioning from external motion cards. The analog command input has an impedance of 5 kΩ, allowing direct connection to low-power signal sources without placing a heavy electrical load on the upstream controller. Its 168 × 99 × 31 mm enclosure supports installation in control cabinets with limited mounting depth.
