Product Description

The XM2201.01-01-31-31-301-NN-105NNNN embedded control produced by Bosch Rexroth is equipped with PLC + MOT + HYD basic system as its function package. The control is supposed to be mounted, installed, and operated only under the manufacturer-specified ambient conditions. The storage and transportation temperature of this product is between -30°C and 85°C. The device comes along with a 24V power connector and two bus base modules. It does not have any wear parts. The unit supports 5Hz to 9Hz vibration resistance with 3.5mm amplitude in compliance with DIN EN 60068-2-6 specifications. The product uses two RJ 45 connections for its communication interfaces.

The control must be kept at a maximum possible distance from interference sources. There should be a clearance of at least 100mm above and below the device inside the control cabinet. The unit must never be tilted when it is removed from the mounting rail. It features 5% to 95% permissible air humidity according to DIN EN 61131-2 specifications. The product should be detached from its top rail using a slotted screwdriver. It should be ensured that the 24V voltage supply of this device is grounded.

The power connector of the control features four plug contacts. The product depicts 11ms shock resistance in all its three axes. Its supply voltage uses a diode for reverse voltage protection. The device utilizes suppressor diodes for transient protection. This unit has a24W power consumption without the S20 I/O modules at nominal voltage. The fastening distance of its mounting rail must not be more than 200mm. The control installation is to be done such that the LED displays on its operating panel are not covered. The control may fail to operate if it has insufficient shielding. This device has a one-year warranty and can be sent to your preferred address through our delivery network.