Product Description

The XM2200.01-01-31-31-301-NN-131N3NN embedded control manufactured by Bosch Rexroth has 512MB RAM. This control features two USB interfaces and an Ethernet interface. The Ethernet interface supports 10MB, 100MB, and 1GB connectivity speeds. The product supports connection to the manufacturer’s I/O extension and function modules through bus base modules. The device must always be mounted inside a terminal box or a closed control cabinet that has an IP 54 or higher degree of protection. The unit has to be mounted only in a vertical orientation when the mounting rail is affixed on a horizontal surface. It features natural convection cooling during operation. The cables used to connect the control must encompass strain reliefs.

The housing in which the product is enclosed must have a size of 126.3 x 100 mm. This device must be removed vertically from the mounting rail on which it is mounted. Its control bus base module must be pressed on the top-hat rail until it is ensured that the latching is closed safely. The unit houses an onboard Multi-Ethernet SERCOS Master fieldbus. The product has three S20-I/O extension modules. This device weighs 0.38kg. The unit is removed from the top-hat rail by means of a slotted screwdriver. It may cause personal injury or material damage if the electric installation or mounting is not done properly.

The embedded control has to be always connected with the manufacturer’s power supply unit for its logic supply. The peripherals connected to the interfaces of the product must adhere to the specifications pertaining to safety-separated circuits. The device is connected to the voltage supply through the XD1 plug on its left side at the bottom. It should be ensured that the unit is grounded so that there is no possibility of interference. The control can be dispatched to your address through reputed freight carriers. It has aone-year warranty.