VT-VSPA1K-1-1X-002-15SEC Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900934739
Ask for AvailabilityThe Bosch Rexroth Indramat VT-VSPA1K-1-1X-002-15SEC is a proportional amplifier from the VT-VSPA Proportional Amplifiers series. This analog-operated amplifier features a supply voltage of 24 V DC, maximum current consumption of 1.8 A, and a max solenoid current of 1.6 A. It is built to the DIN 41494 card standard with dimensions of 100 x 160 mm and uses a 16-pole terminal strip for connections.
Internal Product Review
The VT-VSPA1K-1-1X-002-15SEC is a proportional amplifier card from the Bosch Rexroth Indramat VT-VSPA series, designed for high-precision analog control with supply voltage at 24 V DC and a max solenoid current of 1.6 A. Its DIN 41494 card standard and 16-pole terminal strip connection allow easy integration into control cabinets. This model stands out for stable current output and reliable performance in demanding hydraulic applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-VSPA1K-1-1X-002-15SEC proportional amplifier is a plug-in Eurocard module manufactured by Bosch Rexroth Indramat for the VT-VSPA Proportional Amplifiers series. Installed in a DIN 41494 rack, the card converts a voltage command into a regulated current that drives a single hydraulic solenoid. By providing closed-loop linearization between controller outputs and valve force, the board allows analog positioning or pressure control inside industrial automation systems. The module follows the 100 × 160 mm card format and connects to cabinet wiring through a 16-pole terminal strip, simplifying rack installation in both retrofit and new builds.
During operation the amplifier draws a nominal supply of 24 V DC and its electronics can consume up to 1.8 A, which translates to a peak power demand of 50 VA. The command stage accepts a bipolar input and produces a full-scale reference of +6 V. Inside the control loop, this is translated into an output gradient of 1 mV/mA, simplifying calibration because each milliampere of solenoid current corresponds to a predictable millivolt on the monitor test point. A status LED provides immediate visual feedback on card enable, and the lack of a front plate leaves the trimmer potentiometers accessible for tuning while the card remains seated in the rack.
Safe limits are enforced by the undervoltage threshold at 22 V and an overvoltage cutoff at 35 V, so the board continues to regulate correctly when the cabinet supply fluctuates within this window. Line protection is provided by a 2.5 A slow-blow fuse mounted on the carrier, while the output driver is capable of delivering up to 1.6 A to the connected proportional solenoid. The internal ±9 V regulated rails stabilize the analog sections, and the standardized card geometry with the 16-pole terminal supports orderly rack wiring.
