Product Description

The Bosch VT-UK2-3X/VT10522B/U154 is a VT-UK2-3X series universal card. It features 3 double operational amplifiers and 5 zero point potentiometers. An operational amplifier is an amplifier with high gain and high input impedance (usually with external feedback), used especially in circuits for performing mathematical operations on an input voltage. The hardware on the VT-UK2-3X/VT10522B/U154 can be used for assembling a regulator, differentiator, summator, inverter or a Schmitt trigger. A Schmitt trigger is a bistable circuit in which the output increases to a steady maximum when the input rises above a certain threshold, and decreases almost to zero when the input voltage falls below another threshold. A regulator is a circuit that creates and maintains a fixed output voltage, irrespective of changes to the input voltage or load conditions. A differentiator is a circuit that is designed such that the output of the circuit is approximately directly proportional to the rate of change (the time derivative) of the input

A summator is another type of operational amplifier circuit configuration that is used to combine the voltages present on two or more inputs into a single output voltage. An inverter circuit outputs a voltage representing the opposite logic-level to its input. Its main function is to invert the input signal applied. If the applied input is low then the output becomes high and vice versa. The VT-UK2-3X/VT10522B/U154 universal card requires ±15 Volts DC operational voltage. Its current requirement is always less than 80 milliamps. The current at the output of the VT-UK2-3X/VT10522B/U154 is always less than 5 milliamps. The VT-UK2-3X/VT10522B/U154 is equipped with a 32-pin blade connector for external connections. The Eurocard dimensions are 100 x 160 millimeters.