VT-SWA-LIN-1X/G10-1-K44 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901014812
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
45 Seconds
The Bosch Rexroth Indramat VT-SWA-LIN-1X/G10-1-K44 is part of the VT-SWMA Modules series and uses a Hall-effect sensor principle with a calibration sensitivity of 750 mV per millimeter. This module features a supply voltage of 10 V, IP65 protection class, and a M27 x 2 mounting thread.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the VT-SWA-LIN-1X/G10-1-K44 as part of the VT-SWMA Modules series. The unit serves as a linear feedback conditioner in hydraulic automation, translating the stroke of a magnet carrier into a precise electrical signal that a motion controller can process. By incorporating Hall-effect sensing hardware, it allows machine builders to monitor cylinder or slide positions without direct mechanical coupling, supporting closed-loop control in presses, injection machines, and general servo-hydraulic axes.
The analog output is factory calibrated so that 750 mV/mm of sensor travel appears at the controller input, simplifying scaling inside the PLC. Stable excitation is delivered by the module’s regulated 10 V supply rail, which also feeds the external displacement sensor. Environmental sealing meets IP65, so the electronics tolerate splashing fluids and airborne contaminants when mounted near hydraulic manifolds. Installation is performed through the threaded bushing sized M27 × 2, allowing direct insertion into standard cylinder heads. Position detection relies on a Hall-effect principle, meaning the module measures magnetic field shifts rather than resistive changes, which improves longevity in high-cycle equipment. The adjustable range can be limited with a maximum angle setting of -2 V to protect downstream converters.
The front panel offers a 4-pole DIN connector for the feedback coil, and mating plug type G4W1F is specified for the connection. A secondary G4A5M connector links the sensor head, separating supply and signal leads to minimize crosstalk. Reference alignment of the transducer is performed against a -10 V baseline, while null adjustment can be trimmed to a -5 V offset for asymmetric strokes. Temperature-related variation is limited to a <0.2 %/10 K span drift, and zero drift is held to the same percentage for repeatable positioning over a broad operating range.
Frequently Asked Questions about VT-SWA-LIN-1X/G10-1-K44:
Q: What is the calibration sensitivity of the VT-SWA-LIN-1X/G10-1-K44 module?
A: This model features a calibration sensitivity of 750 mV/mm, enabling fine measurement adjustment.
Q: What sensor principle is utilized in the VT-SWA-LIN-1X/G10-1-K44 module?
A: The VT-SWA-LIN-1X/G10-1-K44 uses a Hall-effect sensor for its sensing principle.
Q: What is the protection class rating of the VT-SWA-LIN-1X/G10-1-K44?
A: This module is protected to IP65, offering complete protection against dust and water jets from any direction.
Q: What supply voltage does the VT-SWA-LIN-1X/G10-1-K44 module require?
A: The required supply voltage for this module is 10 V.
Q: What type of sensor connector is provided on the VT-SWA-LIN-1X/G10-1-K44 module?
A: This model uses a G4A5M sensor connector for electrical connections.
