VT-SR2-1X/1-100 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900976646
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
3 Seconds
The Bosch Rexroth Indramat VT-SR2-1X/1-100 is part of the VT-SWMA Modules series and features a ±10 V command value input and supply voltage of 24 VDC. This module has a printed circuit board design, weighs 0.26 kg, and is equipped with a 32-pin connector plug, Form D.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-SR2-1X/1-100 is a proportional valve amplifier card produced by Bosch Rexroth Indramat. Supplied as a plug-in board, it fits control cabinets where it conditions analog command signals and delivers regulated current to proportional hydraulic valves in industrial automation systems. By converting voltage references into controlled coil current, it serves as the interface between a motion controller and the field valve hardware, allowing the valve to respond predictably to changing command inputs during normal machine operation.
The command stage accepts a differential input of ±10 V, allowing external controllers to modulate spool position over the full stroke range. Internal circuitry is energized by a dedicated ±15 V controller supply derived from the host rack, while the power section draws system power from a separate 24 VDC feed so that logic and load paths remain isolated. Field wiring terminates on a 32-pin connector plug that follows Form D pinout conventions, bringing in supply lines, command references, and monitor points through an organized connection layout. The board is built as a printed circuit board module, which keeps the electronics compact and allows it to slide into the host rack without separate panel wiring. No position feedback circuitry is included, so the card operates in an open-loop scheme unless an external transducer supplies that signal elsewhere in the control system.
Output capability reaches ±100 mA, giving enough current headroom for most single-stage or pilot valves while staying within typical coil thermal limits. Installation is supported by slide-in carriers and the option to seat the board directly in 19-inch racks, which standardizes spacing and airflow between neighboring modules. With a mass of only 0.26 kg, the unit adds very little load to rack hardware and remains easy to handle during installation or removal. As part of the VT-SWMA Modules family, the card follows shared pin compatibility and scaling conventions across related modules, so signal assignment remains consistent within matching rack assemblies.
Frequently Asked Questions about VT-SR2-1X/1-100:
Q: What command value input does the VT-SR2-1X/1-100 module support?
A: The VT-SR2-1X/1-100 accepts a ±10 V command value input for control signals.
Q: What supply voltage is required to operate the VT-SR2-1X/1-100?
A: This module is powered with a 24 VDC supply voltage.
Q: Which type of electrical connector does the VT-SR2-1X/1-100 module use?
A: The VT-SR2-1X/1-100 comes with a 32-pin connector plug, Form D, for electrical connections.
Q: How can the VT-SR2-1X/1-100 module be mounted?
A: The module is designed for mounting in card holders or standard 19-inch racks.
Q: Does the VT-SR2-1X/1-100 module include position feedback?
A: There is no position feedback included with the VT-SR2-1X/1-100 module.
