VT-NE32-18 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-NE32-18 is a compact, unipolar, regulated power supply unit from the VT-NE Power Supply Units series. It operates on 230 VAC or 115 VAC and provides dual filtered and controlled outputs of +25 VDC and +24 VDC with a maximum load current of 2.5 A and 1 A, respectively. The unit measures 128 mm in height, 84 mm in width, 101.5 mm in depth, and weighs 2.2 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-NE32-18 is a compact power supply unit in the VT-NE Power Supply Units series from Bosch Rexroth Indramat. It supplies regulated DC rails to servo drives, proportional valve cards, and control modules. That role makes it a practical choice for distributed automation panels where stable, low-noise power is required.
The unit accepts an operating window of 230 VAC ±10% or 115 VAC ±10% at power-line frequencies of 50/60 Hz. Internally, the rectifier and linear regulator generate two isolated outputs. Channel 1 holds a nominal +25 VDC, while channel 2 delivers +24 VDC under full load. At rated conditions, the first channel can source up to 60 W, supporting reference circuits and solenoid drivers.
Channel 1 can provide a continuous load of 2.5 A, and channel 2 is rated at 1 A. A slow-blow fuse of 4 A is fitted on the filtered side to guard against prolonged overloads. Even at maximum draw, the residual ripple on channel 1 stays below 2 %, which helps preserve signal integrity for analog circuits. The steel housing weighs only 2.2 kg, so the unit can be packed densely on enclosure back plates without adding much panel weight.
Spring terminals accept conductors up to 4 mm², and the housing measures 128 mm by 84 mm by 101.5 mm for enclosure use. Wake Industrial can arrange same-day shipping for replacements, and every purchase is backed by a 1-year warranty. For questions about fault codes or specifications, customers can use the chat tool on the website.
Frequently Asked Questions about VT-NE32-18:
Q: What voltage does Output 1 deliver on the VT-NE32-18 power supply?
A: Output 1 on the VT-NE32-18 provides +25 VDC at full load.
Q: What is the maximum load current supported by the VT-NE32-18 power supply?
A: The maximum load current is 2.5 A for Output 1 and 1 A for Output 2.
Q: What are the acceptable operating voltages for the VT-NE32-18?
A: This unit operates on either 230 VAC ±10% or 115 VAC ±10% input voltage.
Q: What is the maximum output power of Output 2 on the VT-NE32-18?
A: Output 2 can deliver up to 24 W of power at full load.
Q: What type of output fuse is used in the VT-NE32-18 power supply?
A: The VT-NE32-18 uses a 4 A slow-blow fuse for filtered output protection.
