VT 2013 -S-16 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The VT 2013-S-16 proportional amplifier operates with an adjustable output current of 10 to 300 mA, a clock frequency of 100 or 200 Hz, an operating voltage range of 22-35 V, and a power consumption of less than 25 VA. As part of the VT 2000 Proportional Amplifiers from Bosch Rexroth Indramat, it features a 32-pin male connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat VT 2013-S-16 represents the proportional amplifier card of VT 2000 series made to control proportional valves in hydraulic systems.
The electronic device controls valve spool position smoothly and to precise degrees for effective flow and pressure adjustment. The amplifier runs on a 24 VDC electric power supply but must work within a voltage range between 22 to 35 V (with up to 40% tolerance on the higher end and 5% tolerance on the lower end). Because it needs less than 25 VA power and uses under 1 A of current, it serves as an energy-saving system that can run continuously. To avoid damaging faults, the circuit relies on a 2.5 A time-delay fuse, which protects electrical equipment. The VT 2013-S-16 connects to two different types of command value inputs. Command Value 1 accepts 0 to +9 V signals using a standard input, and Command Value 2 connects to 0 to +10 V differential signals with a 100 kΩ input resistor. This device can work with different control methods and signal connections because of its multiple input choices. The adjustment knob S1 commands output signal ramp time extension from 30 milliseconds up to about 1 or 5 seconds. The R130 potentiometer Zw helps users fine-tune valve performance by setting output current between 10 and 300 milliamps.
The amplifier works at either 100 Hz or 200 Hz frequencies (+/- 10%) based on your choice of S2 control setting. The amplifier card uses a 32-pin male connector with DIN 41 612, Form D specifications, and follows Euro-card dimensions of 100 x 160 mm. The front panel dimensions follow 3 HE at 128.4 mm for the part and 3 TE for the width, with the second side measuring 1 TE at 5.08 mm. The unit works within a 0 to 50 °C temperature range and has a weight of 0.1 kg. The device delivers 9V of output power that matches within 1% of its targeted value while handling current levels up to 25mA across loads below 800mA with a 10% tolerance range.
