Product Description:

The VSP40.3DEG-1G0NN-C2D-FN-NN-FW is an operator terminal from Bosch Rexroth Indramat in the VSP IndraControl Terminals series. It combines an industrial PC and a touch interface so a PLC or motion controller can be operated directly from the machine front panel. The unit includes a 15-inch TFT screen, an integrated PC box, and field connections that allow it to function as both the local HMI and the processing node within an automation cell.

Its Intel Celeron 440 processor provides a minimum clock speed of 2 GHz, giving sufficient performance for visualization, data logging, and soft-PLC tasks. The system carries 1 GB of DDR2 RAM, so recipes and operating system functions can reside in memory without excessive paging. Visual output appears on a 15 in active-matrix display that presents 256,000 colors at a native resolution of 1024 × 768 pixels; this pairing keeps trend graphs and alarm dialogs legible in plant lighting. A resistive touch layer serves as the sole user input device, removing the need for an external keyboard in washdown areas. Two Gigabit-capable Ethernet ports support controller networking, while five PCI slots and one PCIe slot permit motion cards or additional fieldbus adapters to be installed without external expansion hardware.

The aluminum bezel provides IP65 front protection when the unit is panel-mounted, while the rear PC box is rated IP20 and must be enclosed in the cabinet. Peak loading reaches 160 W, so the power source should be sized to avoid voltage sag during machine start-up, and the logic section operates from a regulated 24 V DC supply. Peripheral connectivity includes 8 USB ports for service media or barcode scanners, and dual 10/100/1000 Base-T interfaces allow separate information and control networks while the 9.5 kg housing remains suitable for secure panel installation.