Product Description:

The VSP40.3DEG-1G0NN-C2D-DE-NN-FW is a human-machine interface terminal produced by Bosch Rexroth Indramat within the VSP IndraControl Terminals series. The unit combines a display, embedded controller, and input layer to present process data and accept operator commands on the factory floor. By integrating visualization and control in one enclosure, it provides direct access to diagnostics, recipe handling, and motion commands without adding a separate industrial PC.

The front panel houses a TFT screen that measures 15 in., giving operators sufficient viewing area for complex SCADA or drive status pages. Graphics are rendered at 1024 × 768 pixels, so alarms and trend lines remain clear when multiple windows are tiled. Color depth reaches 256,000 shades, which supports gradient objects and IEC-conformant symbol libraries. The terminal includes 8 × USB 2.0 ports for project-file transfers or the connection of barcode readers, while 2 × RJ45 Ethernet connectors let the terminal separate a machine network from a plant-wide backbone. The operating surface has an IP65 rating, which blocks dust and low-pressure water jets so the glass panel can be wiped down during shift changes without shutting the line. Five PCI and one PCIe ×4 slots inside the chassis accept fieldbus adapters or solid-state drives, and the resistive touch layer registers finger or gloved input at 1 g vibration levels.

The terminal has a maximum power draw of 160 W, allowing it to share a fused 10 A circuit with auxiliary cabinet devices. The logic section runs from a 24 V DC supply, which simplifies common-rail distribution with sensors and valve islands. With a mass of 9.5 kg, the unit can be mounted on swing arms without counterweights. One RS-232 port, an IP20 rear housing, and resistance to 15 g shocks during crane loading support use in automated assembly cells. Continuous vibration resistance of 1 g also helps the terminal maintain stable operation in industrial environments.