Product Description:

The VSP40.1BIE-1G0NN-C1C-AN-NN-FW is an operator terminal in the VSP IndraControl Terminals series manufactured by Bosch Rexroth Indramat. As a panel-mount human-machine interface, it presents process data to machine operators and accepts local commands through its integrated keypad and sixteen function keys. This creates a direct link between the automation controller and field equipment on the factory floor.

The terminal’s TFT panel measures 15 in diagonally and renders graphics at 1024 x 768 pixels. This resolution allows detailed visualization of parameter lists and trend plots without the need for an external monitor. Its color depth of 256,000 colors supports clear status coding and alarm differentiation. The aluminum front bezel is sealed to IP65, so dust and low-pressure water jets cannot penetrate when the unit is mounted in a cabinet door. Network connectivity is provided by a 10/100 Base-T Ethernet interface, enabling direct access to PLC networks and remote diagnostics. The front panel measures 370 mm in height and 407 mm in width, which suits panel mounting in control cabinets. Two Type A USB connectors on the bezel support recipe transfer and external storage, while the design omits an internal CD-ROM drive to conserve space and eliminate moving parts.

Internally, the terminal uses a 2 GHz Celeron processor backed by 1 GB of RAM, providing adequate throughput for visualization runtimes and local data buffering. Expansion is handled through 6 PCI slots that accept fieldbus or motion cards, allowing the panel to adapt to specialized tasks such as axis supervision or barcode reading. A wide-range power supply accepts 115/230 VAC, so the same model can be used in North American or European cabinets without a transformer change. The electronics have a rear protection level of IP00 and are intended for installation inside a sheltered control cabinet. This arrangement leaves the rear section open to the cabinet environment, where convection cooling can remove normal operating heat.