Product Description:

The VSP16.3BKG-1G0NN-C2D-DN-NN-FW operator terminal is produced by Bosch Rexroth Indramat within the VSP IndraControl Terminals series. It uses key operation to give operators tactile feedback while they navigate HMI menus and enter commands. In an automated cell, the unit provides visualization, parameter entry, and diagnostic access directly at the production line. This arrangement keeps routine status checks and control input close to the machine instead of placing them at a separate workstation.

Visual clarity is delivered by a 12 in panel with 800 × 600 px resolution and a palette of 256,000 colors, allowing detailed process screens and alarm banners to appear at the same time. The screen uses a TFT backplane, so viewing angles remain consistent on crowded control stations where the display may be seen from the side. A sealed aluminum front rated IP65 resists dust and low-pressure water jets, making the terminal suitable for mounting on machine fronts. The electronics are supplied from a regulated 24 V DC source, and total power demand does not exceed 160 W max. Sixteen dedicated machine function keys sit beneath the display, and an RS232 serial port remains available for legacy PLC communication or barcode scanners.

Connectivity for modern networks is broadened by two Ethernet ports, which allow separate control-network and plant-IT links without relying on an external switch. The front panel also carries 8 USB ports for memory keys, service keyboards, and similar peripherals that need direct access at the terminal. Internal expansion is available through 5 × PCI + 1 × PCIe slots, supporting additional interface cards or graphics hardware when the application requires more connectivity. Data logging is stored locally on a 2.5-inch hard disk with a minimum capacity of 160 GB, and the unit has no optical drive, which reduces moving parts. The enclosure weighs 8.5 kg, which suits panel or swing-arm mounting where stable support is required.