Product Description:

The VSP16.3AKG-1G0NN-C2D-DE-NN-FW is an operator terminal from the VSP IndraControl Terminals series produced by Bosch Rexroth Indramat. Designed as a front-end human-machine interface, it combines a PC-based control platform with an integrated touchscreen so machine operators can issue commands, monitor system status, and visualize process data directly on the factory floor. Its 12-inch panel mounts on enclosures or consoles and communicates with PLCs and drive controllers, serving as the central point for data entry, alarm acknowledgment, and recipe handling in automated cells.

Electrical provisioning is straightforward because the terminal runs on a 24 V DC cabinet supply, and its total draw of 160 W sets the required capacity for power supplies and uninterruptible power modules. A 12-inch TFT with a native resolution of 800 × 600 px renders up to 256,000 colors, while the LED backlight is rated for 50,000 hours to support clear display visibility over extended use. The touch-enabled front glass lets personnel navigate menus without external pointing devices. Network connectivity is built in through 2 × RJ45 Gigabit Ethernet ports for machine-level and plant-level segregation, and peripheral hookup is simplified by 8 × USB 2.0 sockets that accept barcode readers, memory sticks, or keyboards. A single RS232 interface supports legacy devices, and a 15-pin HD-Sub VGA port supports an auxiliary monitor for duplicated displays.

For controller extensions, the internal chassis provides 5 × PCI, 1 × PCIe slots so additional fieldbus cards or specialized I/O boards can be installed without external hubs. The electronics reside in a fan-ventilated housing with an IP20 PC-box rating, making the unit suitable for protected cabinet installation, while the sealed touchscreen forms the only exposed surface and is finished in graphite gray to minimize glare. At 8.5 kg, the assembly helps damp vibration while remaining manageable during installation.