Product Description:

The VSP16.1DBE-512NN-C1C-AD-NN-FW operator terminal is manufactured by Bosch Rexroth Indramat as part of the VSP IndraControl Terminals series. The unit merges a touch-enabled display with an embedded industrial PC so that production personnel can view process variables, issue commands, and tie local stations to higher-level controllers. Within an automation cell it functions as a human-machine interface, eliminating the need for a separate computer and simplifying panel wiring.

Visual feedback comes from a 12 in TFT touch screen whose native resolution is 800 x 600 px. A Celeron 2 GHz processor and 512 MB of RAM run HMI software and small-scale logic tasks, while expansion requirements are met through 6 PCI slots. Network integration is handled by a 10/100Base-T Ethernet port, and two USB Type A receptacles accommodate removable media or scanners. The sealed bezel achieves a front rating of IP65, allowing installation on enclosures exposed to dust or wash-down. These features position the terminal as a self-contained computing node capable of both visualization and control gateway duties.

Bulk data reside on a 3.5 in hard disk with a minimum capacity of 20 GB, and an internal CD-ROM supports software distribution when network access is unavailable. The electronics draw 330 W max. and accept an input of 90 to 264 VAC, aligning with the factory mains specification of 115 to 230 V at 50 to 60 Hz. Thermal limits span +5 to +45 °C during operation and –20 to +60 °C for storage, enabling deployment in control cabinets that are heated only when the machine is active. Classified as PC box Type E, the terminal rounds out the system architecture by combining mass storage, optical media, regulated power acceptance, and temperature tolerance that complement the resources detailed earlier.