Product Description:

The VSB40.1G4E-512NN-C1C-AN-NN-FW industrial PC is produced by Bosch Rexroth Indramat within the VSB Industrial PC Units series. This box-style controller integrates into machine control architectures as the central computing element that executes HMI, motion, and logic tasks in automated equipment. It is supplied as a stand-alone PC box that pairs with a separate control panel, allowing cabinet installation while the operator terminal remains on the machine front. Designed for factory environments, the unit provides CPU, memory, and expansion resources required for deterministic automation software.

The power supply accepts AC 115–230 V, so it can connect directly to single-phase mains found worldwide, and it tolerates line frequencies from 50 to 60 Hz without tap changes. Mechanical resilience is shown by a maximum shock tolerance of 5 g, meaning brief acceleration pulses during transport or vibration will not corrupt the electronics. System memory is equipped with 512 MB of SDRAM, providing adequate space for a real-time operating system and user programs. Persistent storage is handled by a 20 GB 3.5-inch hard disk that accommodates recipe data and event logs. For fieldbus cards or specialized I/O, the PC box offers a 6-slot PCI backplane, allowing multiple add-on boards to be installed without an external expansion chassis.

Network and peripheral connectivity are handled through an integrated Ethernet controller rated at 10/100 Base-T. The physical connection is a shielded RJ45 jack, allowing a direct connection to plant switches. Two front-mounted USB receptacles identified as 2 x Type-A support service keyboards, flash media, or wireless adapters. Environmental ingress is limited by an enclosure rating of IP20, so the PC must be mounted inside a protected cabinet where airflow stays within the specified 3 °C per minute temperature gradient. The unit uses a Celeron 440 processor at 2 GHz and a GIGASTAR control panel link for connection to a separate operator interface.