Product Description:

The VSB40.1G4E-1G0NN-C1C-CN-NN-FW is an industrial PC unit from Bosch Rexroth Indramat's VSB Industrial PC Units series. Installed inside a control cabinet, it hosts automation software, communicates with field devices, and drives a detached operator display for motion-control and visualization tasks on assembly lines. This arrangement lets one cabinet-mounted unit manage processing, communications, and screen output from a central location. Its separated display concept also supports machine layouts where the screen must be positioned away from the electronics.

Inside the PC box, the system uses a Celeron 440 processor with a minimum clock speed of 2 GHz and 1024 MB of DDR memory for HMI tasks and real-time data collection. Graphics output through a 15-pin HD-Sub supports up to 1600 x 1200 pixels, and 8 MB of video memory sends the signal over cable runs up to 30 m to a G4 display or GIGASTAR panel. Network integration relies on an RJ45 (10/100 Base-T) port, while legacy devices connect through RS-232 and two USB ports. Six PCI slots accept motion or fieldbus cards, and the housing requires 50 mm of clearance on all sides for convection cooling. Power comes from AC 115 to 230 V at 50 to 60 Hz, allowing the same unit to operate in multiple regions. The design omits an internal disk drive, and the standard interface set supports peripheral expansion.

The enclosure has an IP20 rating, so the electronics should be installed in a dry control cabinet protected from direct contact and debris. Operation is permitted at ambient temperatures up to +45 °C and at elevations up to 2000 m, which suits typical indoor factory installations. Shock tolerance of 5 g helps the chassis withstand routine handling, panel vibration, and movement during service. The unit is built as Line 40 with design version 1.