Product Description

The VPP60.1BLA-1G0NN-M1C-BN-NN-FW operator terminal manufactured by Bosch can perform control functions based on the application. This product does not allow touchscreen operation. The device is fitted with a keypad with machine function keys and alphanumeric keys. It houses a PC box encompassing three PCI slots. The unit can be connected to the network if needed. The terminal comes with a 60 line code. The product is capable of functioning as a PC-based visualization terminal. The device is supposed to be always connected with those cables that are provided by the manufacturer. This unit is typically deployed in lathes.

The operator terminal does not support operation under water. The product is fitted with a lithium battery that must not be changed by the user. This battery should never be recharged by heating when it is in a discharged state. The device has a 12-inch TFT display with 800 x 600 pixels resolution. The front panel portrays IP 65 protection rating as per DIN 40 050 / IEC 529 specifications. It has a memory capacity of 1GB. The terminal has no disc drive associated with it. The firmware must be bought as a separate sub-item.

The embossed keys of the product feature a chemical-resistant polyester foil covering. The device must be installed as per the instructions given in the specifications. The display can render 256,000 colors. The unit incorporates a Type A PC box. The product houses a Celeron processor with a minimum 1.3GHz frequency. The device has 115VAC to 230VAC supply voltage with 50Hz to 60Hz frequency. The unit includes a 2.5-inch hard disk. It supports temporary temperature changes of up to 3°C, each minute of operation. This PC-based terminal can be sent to any address of your choice internationally with a warranty for one year.