Product Description:

The VPP60.3FEL-4G0NN-D5D-HN-NN-FW operator terminal is produced by Bosch Rexroth Indramat and belongs to the VPP IndraLogic Terminals series. Within an automation cell, it serves as the human-machine interface that presents process data, accepts commands, and gives the machine controller a local display and input point. Its front-mounting design allows integration into control cabinets or machine frames, giving an on-site visualization point that reduces the need for separate PCs or keyboards on the factory floor.

The screen area is sized at 19 in, which provides ample space for multi-window diagnostics and recipe selection. Graphics are rendered at 1280 × 1024 pixels, enabling clear depiction of trends, alarms, and detailed schematics without pixelation. A front gasket and housing combination yields a protection level of IP65; this shields the display face against low-pressure water jets and dust ingress encountered in packaging, food, and machining lines. The front bezel spans 483 mm in width, so the cutout in the enclosure door must match this dimension to maintain sealing compression. Internal electronics operate from a nominal supply of DC 24 V, simplifying power distribution because the voltage matches the common control-circuit level found in most machines.

Two independent Ethernet interfaces support network segmentation, and the presence of 2 ports lets one line address the PLC while the other links to a supervisory network without an external switch. The vertical dimension of the bezel is 400 mm, which helps determine viewing height when the terminal is mounted in ergonomic workstations. Devices can connect to any of the 6 rear USB receptacles for data transfer or peripheral use. There is a touch screen, so operators can adjust setpoints directly on the glass without separate pointing devices, streamlining interaction in environments where gloves are required.