Product Description:

The VPP60.3FEL-2G0NN-D4D-DN-NN-FW is an operator interface terminal produced by Bosch Rexroth Indramat as part of the VPP IndraLogic Terminals series. Designed for machine control stations, the unit combines visualization and input in a single enclosure so users can monitor process variables and issue commands over fieldbus or Ethernet networks. In an automation cell, it serves as the human-machine interface by providing on-screen feedback and touch interaction without requiring an additional control computer. Its front panel is made for cabinet mounting and connects directly to IndraLogic controllers through standard communication ports.

The visualization panel uses a 19-inch TFT screen that renders at 1280 x 1024 pixels, giving operators a dense layout for status graphics and alarm dialogs. Color depth reaches 16 million colors, so trend graphs and diagnostic images appear with clear gradients. All commands are entered through a resistive touch layer, which removes the need for an external keyboard during normal operation. The electronics draw 160 W at peak while running from a 24 VDC supply, which matches the auxiliary power rails commonly found in control cabinets. The aluminum front is sealed to IP65, which helps block dust and water jets when the bezel is properly gasketed against the door cutout.

Communication and expansion are handled by two Ethernet ports rated at 2 x TCP/IP 1 Gbit/s, along with one front USB port, six rear USB ports, and one VGA connector for screen mirroring to a remote display. The housing withstands continuous vibration up to 1 g and shock up to 15 g, allowing installation on moving gantries or press lines. Rear surfaces meet IP20, so the enclosure must remain inside a protected cabinet. The light gray RAL 7035 finish matches other Rexroth modules, and an external UPS can be connected to the 24 V input when buffer time is needed for data logging and orderly shutdown.