Product Description:

The VPP60.3FEL-2G0NN-C3D-DN-NN-FW is an operator terminal produced by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. It combines a graphical panel, embedded controller, and touch interface into a single unit intended for machine-level visualization and control in one enclosure. In an automation cell, this terminal presents process data, receives commands, and forwards them to the PLC network, reducing the need for separate interface devices. It is mounted directly on the cabinet door, allowing operators to monitor pressures, temperatures, and actuator status from the production floor. This arrangement keeps the user interface and control functions at the machine, which helps keep system interaction direct and easy to follow.

The visualization hardware centers on a 19 in diagonal screen that renders at 1280 x 1024 pixels. The panel uses a TFT display and reproduces 16 million colors without flicker. Capacitive sensing enables touch screen operation without a separate keypad. With dual Ethernet sockets rated at 2 x TCP/IP 1 Gbit/s, the terminal can link simultaneously to machine-level control and plant IT services. Six USB 2.0 ports, including one on the front, support USB drives, barcode readers, or backup media, while a single VGA connector allows a mirrored display. The front surface carries a protection rating of IP65, resisting dust and directed water jets, while the rear section is limited to IP20 inside the enclosure. The combination of network, USB, and video connections supports local operation as well as external data access and screen duplication.

Electrical integration takes place through a nominal supply of 24 VDC, with acceptable limits from 19 to 30 VDC so the unit remains stable on battery-backed or long cable feeds. Internal electronics draw up to 160 W under maximum brightness and I/O activity, which should be considered when sizing the control cabinet power source. The housing endures shocks up to 15 g during transport and maintains functional integrity under continuous vibration of 1 g, allowing the terminal to be mounted on moving gantries, presses, or other equipment with moderate dynamic loads. This input range and mechanical durability make the unit suitable for industrial installations where supply variation and repeated machine motion are expected.