Product Description:

The VPP40.3DEM-2G0NN-D4D-HN-NN-FW terminal is manufactured by Bosch Rexroth Indramat and belongs to the VPP IndraLogic Terminals series. It is a panel-mounted human-machine interface that combines visualization and control in one housing for machine-level automation. The unit relies on a projected-capacitive touch screen for local operator input, allowing direct manipulation of process graphics without external keyboards or pointing devices. By integrating computing, networking, and display functions, the terminal reduces cabinet wiring and gives operators direct access to diagnostic data at the machine.

Processing tasks are handled by a 2.4 GHz dual-core Core i5-520M processor that executes IndraLogic runtimes and supervisory software. The system boots from a 192 GB SSD, which reduces seek times and resists vibration common on plant floors. Its 2 GB of DDR3 memory supports local recipe storage and trending buffers, while a native resolution of 1024 × 768 pixels keeps visualization elements sharp on the 15-inch panel. Two Ethernet TCP/IP ports enable segregated control-level and enterprise-level traffic, and a dedicated front USB 2.0 connector simplifies service access without opening the cabinet. Six rear USB ports, four PCI expansion slots, and a 7.2 kg aluminum chassis round out the internal resources and mounting profile.

The viewing surface measures 38.1 cm (15"), giving operators enough area for multi-window diagnostics while keeping the footprint suitable for swing-arm installations. A sealed bezel with IP65 front protection safeguards the display from dust and water jets, whereas the rear electronics are limited to IP20 to permit cabinet ventilation. The terminal draws 160 W at full load from a regulated 24 V DC supply, so standard machine circuits can feed it without an additional AC conversion stage. This arrangement supports front-facing use in wet or dusty machine areas while the rear section remains inside a ventilated cabinet.