4.95 based on 202 reviews

🙶 We have never had a problem in the almost 20 years we have dealt with Wake. We would recommend them to any... 🙷

VPP40.3DEM-2G0NN-D2D-EN-NN-FW Bosch Rexroth Indramat

MPN: R911171650

No Tariffs On US Orders
  • Rated 4.7 (51 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Ask for Availability

Current response time:
3 Minutes 12 Seconds

Preparing your secure checkout page...

The Bosch Rexroth Indramat VPP40.3DEM-2G0NN-D2D-EN-NN-FW is part of the VPP IndraLogic Terminals series and features a 15 inch TFT display with a resolution of 1024 x 768. It supports touch operation, includes 2 GB of memory, and is equipped with two Ethernet TCP/IP ports and six USB 2.0 ports. The terminal offers IP65 front protection, operates with a 24 V DC power supply, and has a power consumption of 160 W.

Quote Request Form:

Warranty
Wake Industrial Warranty

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The VPP40.3DEM-2G0NN-D2D-EN-NN-FW is a human-machine interface supplied by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. It is intended for panel mounting on control cabinets and provides touch-based operator access to programmable logic sequences, motion commands, and diagnostic screens in automated lines. By combining an integrated power supply, network ports, and local USB connectivity, the terminal simplifies field wiring and centralizes visualization tasks for drive controllers and PLCs.

The unit presents data on a 38.1 cm (15") diagonal TFT screen that renders at 1024 × 768 pixels, a format large enough for multi-window layouts. Protective glass and a sealed bezel carry a front rating of IP65, so the display surface tolerates directed water jets and airborne dust. A rear rating of IP20 applies inside the enclosure. All electronics are energized from a 24 V DC bus, and under full brightness and processor load the consumption peaks at 160 W. The system image and runtime data are stored in 2 GB of internal memory, leaving additional space for recipes and log files. One front-access USB 2.0 port supports rapid file transfers, and five additional ports are located on the back, bringing the total to six. Continuous touch operation is supported across the stated operating temperature range, permitting installation in lightly heated production halls.

For plant networking, the terminal has 2 × Ethernet TCP/IP interfaces that allow redundant cabling or separation of control and supervisory traffic. Stable performance is maintained up to +45 °C, while the lower limit remains +5 °C. The aluminum housing survives shocks of 15 g and vibrations up to 1 g at 10–150 Hz without image flicker or spontaneous reboot. A projected-capacitive touch layer enables operation with gloved hands, and the device monitors its own 24 V supply so that orderly shutdown routines can be triggered if voltage drops. The front USB connector is gasketed to preserve the IP65 seal during temporary service access.

Display Size
38.1 cm (15")
Display Type
TFT
Ethernet Ports
2 x Ethernet TCP/IP
Front Protection
IP65
Front Usb Ports
1 x USB 2.0
Memory
2 GB
Operating Temp Max
+45 °C
Operating Temp Min
+5 °C
Operation Type
Touch Operation
Power Consumption
160 W
Power Supply
24 V DC
Rear Protection
IP20
Resolution
1024 x 768
Shock Resistance
15 g
Usb Ports
6 x USB 2.0
Vibration Resistance
1 g
  • VPP403DEM2G0NND2DENNNFW
  • VPP40 3DEM 2G0NN D2D EN NN FW
  • vpp40.3dem-2g0nn-d2d-en-nn-fw

Frequently Asked Questions about VPP40.3DEM-2G0NN-D2D-EN-NN-FW:

Q: What is the display size and type on the VPP40.3DEM-2G0NN-D2D-EN-NN-FW terminal?

A: The VPP40.3DEM-2G0NN-D2D-EN-NN-FW features a 38.1 cm (15") TFT display for clear visualization.

Q: How many Ethernet ports are available on the VPP40.3DEM-2G0NN-D2D-EN-NN-FW?

A: This terminal includes two Ethernet TCP/IP ports for reliable network connectivity.

Q: What level of front protection does the VPP40.3DEM-2G0NN-D2D-EN-NN-FW provide?

A: The front panel of the device is rated at IP65, offering strong protection against dust and water.

Q: What power supply voltage is required for the VPP40.3DEM-2G0NN-D2D-EN-NN-FW terminal?

A: The VPP40.3DEM-2G0NN-D2D-EN-NN-FW operates on a 24 V DC power supply for safe and efficient installation.

Q: What type of operation does the VPP40.3DEM-2G0NN-D2D-EN-NN-FW support?

A: This model supports touch operation, enabling direct interaction with the device's interface.


Internal Product Review

  • ‘‘The VPP40.3DEM-2G0NN-D2D-EN-NN-FW is a Bosch Rexroth IndraLogic terminal with a large-format TFT display and touch operation. Dual Ethernet TCP/IP ports and IP65 front protection support dependable integration on production equipment. A 24 V DC supply and 2 GB memory make this terminal a strong choice for stable HMI deployment.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo